3/4" Stem x 1/2" Pipe CTS ID JG Twist & Lock Speedfit Reducer
In stock
$6.51
[{"Product Highlights":"3/4\" x 1/2\""},{"Product Highlights":"Engineered Plastic"},{"Product Highlights":"Yes"},{"Product Highlights":"B.S.I. to BS EN ISO9001, NSF-14, NSF-61, ASTM F 877, CSA 137.5, ASSE 1061 Standards Met"},{"Product Highlights":"25 Year Warranty"}]
Note: A TSI20 Insert is required for heating applications (and recommended for plumbing applications) when making a connection to PEX. This insert is sold separately.
NOTE: Size is STEM x CTS
John Guest Speedfit Push-to-Connect Reducers are the easiest and most dependable way to reduce the diameter of another Speedfit fitting and join Copper, PEX, or CPVC pipe in any combination with no solder, glue, or tools required. Simply insert the stem end of the reducer into another Speedfit fitting to reduce its diameter. JG Speedfit fittings use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. When twisted into place, the locking cap locks the pipe in place ensuring maximum security. Disconnection is just as easy with no tools needed; simply twist the cap counterclockwise to unlock then depress collet against the fitting to remove the pipe. JG Speedfit Twist-to-Lock fittings are suitable for hot and cold potable water and hydronic heating applications. Code approved for behind-the-wall installations. 25-Years warranty.
Features
JG Speedfit technology provides a reliable, leak-free connection
Connects to copper, CPVC and PEX pipe in any combination
Simple to use with no tools, torches or glue required
Suitable for hot and cold potable water and hydronic heating applications
Approved for behind-wall use
25-Years warranty
Lead-free, Full flow, & UV Resistant
Specifications:
150 psi @ 70°F
60 psi @ 140°F
NOTE: Speedfit fittings cannot be used on stainless steel pipe.
DO NOT USE FOR gas, fuel oil or compressed air applications.Hide Description
| Size | 3/4" x 1/2" |
|---|---|
| Max TempPressure | 160 psi @ 73°F, 100 psi @ 180°F, 80 psi @ 200°F (Water Application) |
| Warranty | 25 Year |
| Material | Engineered Plastic |
| Features | EPDM O_Ring |
Write Your Own Review